No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

File Access and Protocols Feature Guide 13

OceanStor 18500 V3 and 18800 V3 Mission Critical Storage System V300R003

This document describes the implementation principles and application scenarios of the NAS feature. Also, it explains how to configure and manage NAS.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Impact and Restrictions

Impact and Restrictions

This section describes the FTP feature in terms of supported protocols, network requirements, dependency on other features, and impact on system performance.

Supported Protocols

The storage system supports the FTP protocol and FXP mode, and does not support FTPS protocol.

(Applicable to V300R003C00 and V300R003C10) The storage system supports the FTP protocol and FXP mode, and does not support FTPS protocol.

(Applicable to V300R003C20) The storage system supports the FTP and FTPS protocol and FXP mode.

Network Requirements

The FTP feature supports the IPv4 and IPv6 network access protocols.

Interaction with Other Features

Table 5-1 describes the relationship between the FTP feature and other features.

Table 5-1  Relationship between the FTP feature and other features

Feature

Relationship

CIFS/NFS/HTTP

File systems can be shared using multiple protocols. In multi-protocol sharing mode, a file in a file system cannot be written concurrently. When sharing a file system using multiple protocols, you are advised to configure read-write sharing for one protocol and read-only sharing for other protocols.
NOTICE:

A file in a file system that written concurrently in multi-protocol sharing mode will cause data loss, exercise caution when using it.

Impact on System Performance

File systems can be shared in NFS, CIFS, FTP, and HTTP modes at the same time. When clients concurrently access a file system based on different protocols, the overall performance slightly decreases.

Translation
Download
Updated: 2019-08-14

Document ID: EDOC1000084098

Views: 30803

Downloads: 72

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next