No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

File Access and Protocols Feature Guide 11

OceanStor 18500 V3 and 18800 V3 Mission Critical Storage System V300R003

This document describes the implementation principles and application scenarios of the NAS feature. Also, it explains how to configure and manage NAS.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Enabling the FTP Service

Enabling the FTP Service

Before creating a FTP share, check whether the FTP service has been enabled and whether parameters are correct.

Prerequisites

You have logged in to the DeviceManager as an administrator that has the permission to view the file system structure. The following administrators have the permission:

  • Super administrator
  • Administrator

Procedure

  1. Log in to DeviceManager.
  2. Choose Settings > Storage Settings > File Storage Service > FTP Service.
  3. Configure FTP service parameters. The related parameters are shown in Table 5-5.



    Table 5-5  FTP Parameters

    Parameter

    Description

    Value

    Enable

    Whether to enable FTP sharing. After this function is enabled, you need to set FTPS Connection Mode and Plaintext FTP.
    • FTPS Connection Mode: File Transfer Protocol over SSL (FTPS) is an encrypted FTP protocol. It supports two transfer modes:
      • Explicit: Port 21 is used for transferring by default.
      • Implicit: Port 990 is used for transferring by default.
      The implicit mode is more securer than the explicit mode.
    • Plaintext FTP: indicates whether to enable the plaintext FTP that is not encrypted. After the plaintext FTP is enabled, there may be security risks.

    [Default value]

    Disabled

    [Example]

    Enable, FTPS Connection Mode: Implicit

    Allow anonymous user access

    Whether anonymous users are allowed to access an FTP shared directory. After enabled, you must specify the shared directory, including file system and quota tree.

    NOTE:
    The anonymous user has the permission restrictions below:
    • Cannot upload file starting with ..
    • No deleting or renaming file permission.

    [Default value]

    Disabled

    [Example]

    Enable

    File System

    File system that is shared in FTP (mandatory).

    [Example]

    FileSystem001

    Quota Tree

    Level-1 directory of a file system (optional).

    [Example]

    Share

    Share Path

    The directory that the anonymous user can access. The path of such a directory consists of the File System and Quota Tree.

    [Example]

    /FileSystem001/Share

  4. Click Save.

    The Warning dialog box is displayed.

  5. Confirm the information in the dialog box and select I have read and understand the consequences associated with performing this operation, then click OK.

    The Success dialog box is displayed.

  6. Click OK to finish configuring FTP service global parameters.
Translation
Download
Updated: 2018-07-19

Document ID: EDOC1000084098

Views: 24647

Downloads: 72

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next