No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

File Access and Protocols Feature Guide 11

OceanStor 18500 V3 and 18800 V3 Mission Critical Storage System V300R003

This document describes the implementation principles and application scenarios of the NAS feature. Also, it explains how to configure and manage NAS.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Accessing HTTP Shares

Accessing HTTP Shares

This section describes how to access an HTTP share in different ways.

Cadaver Software

Cadaver is a program that is commonly used to manage WebDAV share queries and modifications in Linux and UNIX, but HTTPS is not supported.

  1. Log in to the client as user root.
  2. Download and install Cadaver. For details about how to install Cadaver, see the related document.
  3. Run the cadaver logical ip address command. logical ip address indicates a logical port IP address used by the storage system to provide HTTP shares.
  4. Enter the user name and password of the local authentication user as prompted.

Web Browser

HTTP is a non-security protocol. If the web browser supports HTTPS, you are advised to use HTTPS to connect to the storage system.
NOTE:

Before using the web to access HTTP shares, run the change service http enable_auto_index=yes command on the CLI to open the directory list; otherwise, you cannot use the web to access HTTP shares.

  1. Open a web browser.
  2. In the address box, enter http://logical ip address, where logical ip address indicates a logical port IP address used by the storage system to provide HTTP shares.

    NOTE:
    • By default, the storage system provides the HTTPS service certificate. You are advised to replace the certificate with the private certificate before accessing HTTPS shares. After the certificate is replaced, the CA certificate of the storage system must be imported for the browser to eliminate security alarms. As the service IP address is used to access the HTTPS service, alarm This website's address does not match the address in the security certificate cannot be cleared.
    • After the certificate provided by the storage system expired or is revoked, the browser displays the security alarm. Replace the certificate accordingly.

  3. Enter the user name and password of the local authentication user as prompted.
Translation
Download
Updated: 2018-07-19

Document ID: EDOC1000084098

Views: 23753

Downloads: 72

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next