No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Parts Replacement 12

OceanStor 18500 V3 and 18800 V3 Mission Critical Storage System V300R003

This document describes the procedure for replacing the parts of storage system in terms of safety operations, preparations, and precautions.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Operating the Equipment

Operating the Equipment

When operating the equipment, ensure safety precautions have been taken to prevent personal injury and equipment damage.

Power-on and Power-off

  • Before checking the device and cables, ensure that the system power supply is switched off; otherwise, loose cable connections may result in personal injury or equipment damage.
  • Do not wear an ESD strap when powering on the equipment to prevent a power shock.
  • Do not remove or insert cables and field replaceable units (FRUs) during system startup.
  • After you switch off the power supply, wait at least one minute before switching it back on.
  • To avoid disk damage and data loss, do not switch the power supply off while any disk running indicators are still blinking.

Troubleshooting

Do not touch the connectors of power cables or communication cables. Otherwise, an electrical shock may occur if there is current in the cables.
Do not touch the device with bare hands in electrostatic sensitive areas. Wear an ESD wrist strap, ESD gloves, or ESD clothes to prevent personal injury or equipment damage.
When you perform troubleshooting, be aware of the following precautions:
  • Do not perform troubleshooting when during a thunderstorm.
  • Ensure that the power cable is intact and the grounding measures are safe and effective.
  • Keep the troubleshooting area clean and dry.
Translation
Download
Updated: 2019-05-15

Document ID: EDOC1000084105

Views: 22967

Downloads: 140

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next