No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Parts Replacement 12

OceanStor 18500 V3 and 18800 V3 Mission Critical Storage System V300R003

This document describes the procedure for replacing the parts of storage system in terms of safety operations, preparations, and precautions.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Using SmartKit for Parts Replacement (Recommended)

Using SmartKit for Parts Replacement (Recommended)

As a piece of multi-purpose tool software, Huawei SmartKit (SmartKit for short) efficiently helps users to quickly replace field replaceable units (FRUs), and automatically checks software and hardware status before and after the replacement to ensure that components are successfully replaced.


SVP components cannot be replaced using SmartKit.


  1. Start the SVP.
  2. Run the SmartKit.
    1. On the SVP desktop, double-click the SmartKit icon.

      The login page is displayed.

    2. Enter the user name and password and click Log In.


      Use the admin account and password of the OceanStor DeviceManager to log in to the SVP. The default user name and password are admin and Admin@storage respectively.

  3. Choose MyTools > Maintain.
  4. In the right function pane, click FRU Replacement.

    The Select Device dialog box is displayed, as shown in Figure 3-1.

    Figure 3-1  Select Device

  5. Select the device with unit you want to replace, and click OK.

    The FRU Replacement dialog box is displayed, as shown in Figure 3-2.

    Figure 3-2  FRU Replacement

  6. In the FRU Replacement area, click the parts that you want to replace.

    Take optical module for example. The Replace Optical Module Wizard dialog box is displayed, as shown in Figure 3-3.

    Figure 3-3  Replace Optical Module Wizard

  7. In the optical module list, select the optical that you want to replace, and click Next.

    The system prepares for the optical module replacement, as shown in Figure 3-4.

    Figure 3-4   Before-replacement check

  8. Click Next.

    The optical replacement page is displayed, as shown in Figure 3-5.

    Figure 3-5  Optical module replacement

  9. Click Replaced.

    The Warning dialog box is displayed, as shown in Figure 3-6.


    Before performing this step, you must manually replace the corresponding unit.

    Figure 3-6  Warning

  10. Click OK.

    The system automatically performs post-replacement check, as shown in Figure 3-7.

    Figure 3-7   Post-Replacement check

  11. Click Next.

    The Complete page is displayed, as shown in Figure 3-8.

    Figure 3-8  Complete

  12. Click Finish.

    You have finished replacing an optical module.

Updated: 2019-05-15

Document ID: EDOC1000084105

Views: 22776

Downloads: 140

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next