No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Parts Replacement 12

OceanStor 18500 V3 and 18800 V3 Mission Critical Storage System V300R003

This document describes the procedure for replacing the parts of storage system in terms of safety operations, preparations, and precautions.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Installing a Chassis Cover

Installing a Chassis Cover

This section describes how to install the chassis cover for the SVP after replacing one or more SVP parts.


  • You have removed the SVP from the rack and the components in the chassis are replaced. For details, see Removing the SVP.
  • You have obtained the rack number and chassis number of the SVP.
  • You have located the SVP based on the preceding information, and labeled its panel to prevent misoperations.

Tools and Materials

  • ESD gloves or ESD wrist strap
  • Flat-head screwdriver


  1. Place the chassis cover horizontally, align it with the fixing slots on both side panels of the chassis, and close the handle. See steps (1) and (2) in Figure 7-2.
  2. Tighten the latch using a flat-head screwdriver to secure the handle. See step (3) in Figure 7-2.

    Figure 7-2  Installing a chassis cover

Updated: 2019-05-15

Document ID: EDOC1000084105

Views: 21175

Downloads: 140

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next