No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Product Description 15

OceanStor 5300 V3, 5500 V3, 5600 V3, 5800 V3, and 6800 V3 Storage System V300R003

This document introduces the storage system from the aspects of the market position, features, architecture, technical specifications, production configuration, environment requirement, standard compliance, and granted certifications.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Operation and Maintenance

Operation and Maintenance

The storage systems can be operated and maintained by using the DeviceManager and the command-line interface (CLI), adapting to different environments and user habits.

Introduction to the DeviceManager

Figure 10-1 shows the DeviceManager main window.
Figure 10-1  DeviceManager main window

Table 10-1 describes the components of the DeviceManager main window.
Table 10-1  Components of the DeviceManager main window

No.

Name

Description

1

Function pane

The function pane shows a page associated with the current operation.

2

Status bar

The status bar shows information such as the user name currently logged in and the login time.

3

Navigation bar

The navigation bar shows the function modules of a storage system. Users can click a function module to configure the corresponding functions.

4

Exit, help, and language selection area

This area displays an exit button, a help button, and a language selection button. DeviceManager supports two languages: simplified Chinese and English.

5

Fault statistics area

The fault statistics area shows the number of each level of system faults, helping users learn about the running status of a storage system.

Users can log in to the DeviceManager by using a common browser.

Introduction to the CLI

The CLI enables users to manage and maintain the V3 series storage systems using command lines.

Users need to log in to the CLI by using terminal software, such as the HyperTerminal provided by Windows, or PuTTY.

There are two ways to log in to the CLI.
  • Log in through a serial port of a storage system. To connect to a serial port, the maintenance terminal must be located next to the storage system. Therefore, this login mode is applicable to the scenario where a user does not know the management IP address of a storage system or a storage system is faulty.
  • Log in through a management network port of a storage system. When there are reachable routes, a user can log in to the CLI by entering the IP address of the management network port of a storage system in the terminal software. IP networks are easily accessible. Therefore, a user can log in to a storage system remotely, and this login mode is more popular.
Translation
Download
Updated: 2019-02-01

Document ID: EDOC1000084184

Views: 37565

Downloads: 1161

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next