No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Product Description 15

OceanStor 5300 V3, 5500 V3, 5600 V3, 5800 V3, and 6800 V3 Storage System V300R003

This document introduces the storage system from the aspects of the market position, features, architecture, technical specifications, production configuration, environment requirement, standard compliance, and granted certifications.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Indicator Introduction

Indicator Introduction

After a controller enclosure is powered on, you can check the current operating status of the controller enclosure by viewing its indicators.

Indicators on the Front Panel

Figure 4-26 shows the indicators on the front panel of a 2 U 25-disk controller enclosure and Figure 4-27 shows the indicators on the front panel of a 2 U 12-disk controller enclosure.
Figure 4-26  Indicators on the front panel of a 2 U 25-disk controller enclosure

1

Running indicator of the disk module

2

Location/Alarm indicator of the disk module

3

Location indicator of the controller enclosure

4

Alarm indicator of the controller enclosure

5

Power indicator/Power button of the controller enclosure

   
Figure 4-27  Indicators on the front panel of a 2 U 12-disk controller enclosure

1

Running indicator of the disk module

2

Location/Alarm indicator of the disk module

3

Location indicator of the controller enclosure

4

Alarm indicator of the controller enclosure

5

Power indicator/Power button of the controller enclosure

   
Table 4-17 describes the indicators on the front panel of the controller enclosure.
Table 4-17  Description of the indicators on the front panel of a controller enclosure

Module

No.

Indicator

Status and Description

Disk module

1

Running indicator of the disk module

  • Steady green: The disk module is working correctly.
  • Blinking green: Data is being read and written on the disk module.
  • Off: The disk module is powered off or powered on incorrectly.

2

Location/Alarm indicator of the disk module

  • Steady red: The disk module is faulty.
  • Blinking red: The disk module is being located.
  • Off: The disk module is working correctly or hot swappable.

System subrack

3

Location indicator of the controller enclosure

  • Blinking blue: The controller enclosure is being located.
  • Off: The controller enclosure is not located.

4

Alarm indicator of the controller enclosure

  • Steady red: An alarm is generated on the controller enclosure.
  • Off: The controller enclosure is working correctly.

5

Power indicator/Power button of the controller enclosure

  • Steady green: The controller enclosure is powered on.
  • Blinking green (0.5 Hz): The controller enclosure is being powered on.
  • Blinking green (1 Hz): The controller enclosure is in the burn-in test.
  • Blinking green (2 Hz): The controller enclosure is in the operating system boot process, or is being powered off.
  • Off: The controller enclosure is powered off or is in the standby state.

Indicators on the Rear Panel

Figure 4-28 shows the indicators on the rear panel of a controller enclosure.
NOTE:

The following figure shows the indicators on the OceanStor 5500 V3.

Figure 4-28  Indicators on the rear panel of a controller enclosure

1

Power indicator/Hot Swap button on an interface module

2

Link/Speed indicator of the 16 Gbit/s Fibre Channel port

3

Running/Alarm indicator of the power module

4

Link/Active indicator of the management network port

5

Speed indicator of the management network port

6

Power indicator of the controller

7

Alarm indicator of the controller

8

Mini SAS HD expansion port indicator

9

Link/Active/Mode indicator of the SmartIO port

10

Running/Alarm indicator of the BBU

Table 4-18 describes the indicators on the rear panel of a controller enclosure.

Table 4-18  Description of the indicators on the rear panel of a controller enclosure

Module

No.

Indicator

Status and Description

Interface module

1

Power indicator/Hot Swap button on an interface module

  • Steady green: The interface module is working correctly.
  • Blinking green: The interface module receives a hot swap request.
  • Steady red: The interface module is faulty.
  • Off: The interface module is not powered on or can be hot-swappable.

2

Link/Speed indicator of the 16 Gbit/s Fibre Channel port

  • Steady blue: The data transfer rate is 16 Gbit/s.
  • Blinking blue: Data is being transferred.
  • Steady green: The data transfer rate is 4 Gbit/s or 8 Gbit/s.
  • Blinking green: Data is being transferred.
  • Steady red: The port is faulty.
  • Off: The link to the port is down.

Power-BBU module

3

Running/Alarm indicator of the power module

  • Steady green: The power supply is correct.
  • Blinking green: The power input is normal but the disk enclosure is powered off.
  • Steady red: The power module is faulty.
  • Off: No external power input is found.

Controller

4

Link/Active indicator of the management network port

  • Steady green: The port is connected properly.
  • Blinking green: Data is being transferred.
  • Off: The port is connected abnormally.

5

Speed indicator of the management network port

  • Steady orange: Data is being transferred at the highest rate.
  • Off: The data transfer speed is lower than the highest speed.

6

Power indicator of the controller

  • Steady green: The controller is powered on.
  • The Power indicator blinking green and the Alarm indicator blinking red: The controller is being located.
  • Blinking green (0.5 Hz): The controller enclosure is powered on and in the BIOS boot process.
  • Blinking green (2 Hz): The controller is in the operating system boot process, or the controller is in the power-off process.
  • Off: The controller is absent or powered off.

7

Alarm indicator of the controller

  • Steady red: An alarm is generated on the controller.
  • The Alarm indicator blinking red and the Power indicator blinking green: The controller is being located.
  • Off: The controller is working correctly.

8

Mini SAS HD expansion port indicator

  • Steady blue: Data is transferred to the upstream disk enclosure at the rate of 4 x 12 Gbit/s.
  • Steady green: Data is transferred to the downstream disk enclosure at the rate of 4 x 3 Gbit/s or 4 x 6 Gbit/s.
  • Steady red: The port is faulty.
  • Off: The link to the port is down.

Link/Active/Mode indicator of the SmartIO port

  • Blinking blue slowly (1 Hz): The interface module is working in FC mode, and the port link is down.
  • Blinking blue quickly (2 Hz): The interface module is working in FC mode, and data is being transmitted.
  • Steady blue: The interface module is working in FC mode, the port link is up, and no data is being transmitted.
  • Blinking green slowly (1 Hz): The interface module is working in ETH mode, and the port link is down.
  • Blinking green quickly (2 Hz): The interface module is working in ETH mode, and data is being transmitted.
  • Steady green: The interface module is working in ETH mode, the port link is up, and no data is being transmitted.
  • Steady red: The port is faulty.
  • Off: The port is not powered on.

Power-BBU module

10

Running/Alarm indicator of the BBU

  • Steady green: The BBU is fully charged.
  • Blinking green (1 Hz): The BBU is being charged.
  • Blinking green (4 Hz): The BBU is being discharged.
  • Steady red: The BBU is faulty.
a: When the onboard port is a GE electrical port, the indicators on both sides of the port are the Speed indicator and Link/Active indicator. For details about these indicators, see No.4 and No.5.
Translation
Download
Updated: 2019-02-01

Document ID: EDOC1000084184

Views: 34814

Downloads: 1135

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next