No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Administrator Guide 15

OceanStor 5300 V3, 5500 V3, 5600 V3, 5800 V3, and 6800 V3 Storage System V300R003

Routine maintenance activities are the most common activities for the storage device, including powering on or off the storage device, managing users, modifying basic parameters of the storage device, and managing hardware components. This document applies to the system administrators who are responsible for carrying out routine maintenance activities, monitoring the storage device, and rectifying common device faults.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Exporting System Data Using SmartKit

Exporting System Data Using SmartKit

After installing the SmartKit information collection tool on a storage system, you can use the tool to customize information collection policies and collect information about the storage system in real time.

Prerequisites

The SmartKit information collection tool has been installed on the maintenance terminal.

Context

After starting the SmartKit tool, you can obtain tool use instructions by clicking in the upper right corner of the interface.

Procedure

  1. Start SmartKit.

    The SmartKit page is displayed.

  2. Add a device.
    1. Click Devices and then Add.

      The Add device step 2-1: Basic Information dialog box is displayed.

    2. Enter basic information, including the IP address and proxy. In the Add Policy and Select Proxy areas, select Specify IP Address (add a device by the IP address) and No Proxy, respectively.
    3. Enter configurations, including the user name, password, and port of the device. Click Next. In the Login Information area, enter the Username, Password, and Port of the device to be added. The default value of Port is 22.
    4. Click Finish.

      The newly added device is displayed in the device list.

  3. Collect information.
    1. On the main page, choose ... > MyTools > Storage > Routine Maintenance > Information Collection.

      The Information Collection dialog box is displayed.

    2. In the device list, select the device whose information you want to collect and click Setting.

      The Set Device Information Collection dialog box is displayed.

    3. On the Base Setup tab page, set items to be collected for the device and click OK.

      The device information collection setting is complete.

      NOTE:
      • The storage system can collect information such as system logs, alarm logs, operation data, disks, and electronic labels.
      • SmartKit can collect device information by node. On the Advanced Settings tab page, select the node whose information you want to collect and click . The selected node is displayed in the list on the right.

    4. In the Information Collection dialog box, click Collect.

      Information about the selected node starts to be collected. The information collection status is displayed at the bottom of the page.

  4. Check the information collection result.

    Click Open Directory to check collected device information.

Translation
Download
Updated: 2019-04-17

Document ID: EDOC1000084191

Views: 86702

Downloads: 2301

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next