No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Administrator Guide 15

OceanStor 5300 V3, 5500 V3, 5600 V3, 5800 V3, and 6800 V3 Storage System V300R003

Routine maintenance activities are the most common activities for the storage device, including powering on or off the storage device, managing users, modifying basic parameters of the storage device, and managing hardware components. This document applies to the system administrators who are responsible for carrying out routine maintenance activities, monitoring the storage device, and rectifying common device faults.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Modifying the General Properties of an Oracle Instance

Modifying the General Properties of an Oracle Instance

This operation allows you to modify the general properties of an Oracle instance.


  1. Log in to DeviceManager.
  2. Choose Provisioning > Application > Oracle.
  3. Select the Oracle instance whose general properties you want to modify and click Properties.

    The Properties of Oracle Storage Resource dialog box is displayed.

  4. On the General tab, modify its general properties.

    Table 7-15 describes the related parameters.
    Table 7-15  Parameters in the general properties of an Oracle instance



    Example Value


    Name of the instance.

    The name must meet the following requirements so that the instance is available to host applications:
    • Must be unique.
    • Contains only letters, digits, underscores (_), periods (.), and hyphens (-).
    • Contains 1 to 22 characters.




    Description of the instance.



  5. Click OK.

    The Execution Result dialog box is displayed, indicating the operation result.

  6. Click Close.
Updated: 2019-04-17

Document ID: EDOC1000084191

Views: 85882

Downloads: 2300

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next