No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Administrator Guide 15

OceanStor 5300 V3, 5500 V3, 5600 V3, 5800 V3, and 6800 V3 Storage System V300R003

Routine maintenance activities are the most common activities for the storage device, including powering on or off the storage device, managing users, modifying basic parameters of the storage device, and managing hardware components. This document applies to the system administrators who are responsible for carrying out routine maintenance activities, monitoring the storage device, and rectifying common device faults.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Adding Recipient Email Addresses

Adding Recipient Email Addresses

You can add a recipient email box for alarms by performing operations in this section.

Prerequisites

  • You have logged in to the DeviceManager as an administrator that has permission. Only administrators and super administrators have permission.
  • The email notification function has been enabled.
  • An SMTP server is available and has been configured.

Procedure

  1. Log in to DeviceManager.
  2. Choose Settings > Alarm Settings > Email Notification.
  3. Add a recipient email box.
    1. Under the Recipient Settings list, click Add.

      The Add Recipient Information dialog box is displayed.

    2. In the Recipient Email area, enter the recipient's email address.
    3. In Notification Type, set the notification type.
    4. When notification type is set to Alarm, select an alarm severity level in the Alarm Severity area.
    5. Click OK.
    6. Click Save.

Result

After the recipient email addresses are successfully added, you can view the added email addresses in the recipient email address area.

Translation
Download
Updated: 2019-08-14

Document ID: EDOC1000084191

Views: 91408

Downloads: 2308

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next