No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Administrator Guide 15

OceanStor 5300 V3, 5500 V3, 5600 V3, 5800 V3, and 6800 V3 Storage System V300R003

Routine maintenance activities are the most common activities for the storage device, including powering on or off the storage device, managing users, modifying basic parameters of the storage device, and managing hardware components. This document applies to the system administrators who are responsible for carrying out routine maintenance activities, monitoring the storage device, and rectifying common device faults.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Resetting the Pre-shared Key

Resetting the Pre-shared Key

For security purposes, you are advised to periodically reset the pre-shared key. Using the pre-shared key you set and the system's secure key generation algorithm, the system generates a new authentication certificate. This certificate is used to authenticate the session between the storage system and antivirus (AV) agent.

Procedure

  1. Set the pre-shared key on the storage system.
    1. Log in to DeviceManager.
    2. Choose Settings > AntiVirus > Pre-Shared Key Settings.
    3. Set the parameters New Pre-Shared Key and Confirm Pre-Shared Key.

      NOTE:
      • The New Pre-Shared Key must be same as the Confirm Pre-Shared Key.
      • The pre-shared key must meet the following complexity requirements:
        1. Contains 16 to 63 characters.
        2. Contains spaces and special characters including !"#$%&\'()*+,-./:;<=>?@[\\]^`{_|}~
        3. Contains any two of the following character types: uppercase letters, lowercase letters, and digits.

    4. Click Save.

      The Success dialog box is displayed indicating that the operation succeeded.

    5. Click OK.
  2. Set the pre-shared key on the antivirus server.
    1. In the cfg folder under the installation directory, find configuration file agentConfig.ini for the antivirus agent. Click the file to open it.
    2. In the configuration file, change the value of Pwd, which indicates the pre-shared key, to the same value as that on the storage system. Save the configuration file.

      NOTE:

      For security purposes, the value of Pwd is encrypted in the configuration file. After the configuration file is opened again, the value of Pwd is displayed as null. However, the pre-shared key has taken effect.

    3. Restart the antivirus agent program.
      The pre-shared key has been successfully set

Follow-up Procedure

After the settings are complete, choose Settings > Antivirus > Antivirus Server on DeviceManager. In the Status area, view the antivirus server status. When the antivirus server status is normal, the settings are successful. Otherwise, reconfigure the settings.

Translation
Download
Updated: 2019-04-17

Document ID: EDOC1000084191

Views: 85756

Downloads: 2300

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next