No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Administrator Guide 15

OceanStor 5300 V3, 5500 V3, 5600 V3, 5800 V3, and 6800 V3 Storage System V300R003

Routine maintenance activities are the most common activities for the storage device, including powering on or off the storage device, managing users, modifying basic parameters of the storage device, and managing hardware components. This document applies to the system administrators who are responsible for carrying out routine maintenance activities, monitoring the storage device, and rectifying common device faults.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Modifying the Settings for Dumping Performance Monitoring Statistics (Applicable to V300R003C00/V300R003C10)

Modifying the Settings for Dumping Performance Monitoring Statistics (Applicable to V300R003C00/V300R003C10)

After enabling the dumping for performance monitoring statistics, you can dump performance monitoring statistics to a specific server using File Transfer Protocol (FTP) or Secure File Transfer Protocol (SFTP).

Prerequisites

  • The dump function for the performance monitoring statistics has been enabled.
  • If performance monitoring statistics is stored on an FTP server and a firewall is configured on the network, port 21 is enabled.
  • If performance monitoring statistics is stored on an SFTP server and a firewall is configured on the network, port 22 is enabled.

Precaution

Before dumping performance monitoring data using FTP or SFTP to a specified third-party application server, ensure that the communication between the primary controller of the storage system and the third-party application server is normal. To improve communication reliability, you are advised to configure the FTP server or SFTP server and the primary controller of the storage system on the same LAN and their IP addresses in the same network segment. Run the show controller general command on the CLI. If Role of a controller is Master, the controller is the primary controller of the storage system.
NOTE:
If the third-party application server is connected to the management network port on the secondary controller of the storage system, the dump function is unavailable.

Procedure

  1. Log in to DeviceManager.
  2. Choose Settings > Monitor Settings > Dump Settings.
  3. Modify the settings for dumping performance monitoring statistics.
    1. Select Enable.
    2. In Transport protocol, select SFTP or FTP.

      NOTE:

      To ensure compatibility, the system still supports File Transfer Protocol (FTP). It is recommended to use the Secure File Transfer Protocol (SFTP) for data transfer security.

    3. In Username, type a username.
    4. In Password, type a password for the username.
    5. In Server IP address, type the IP address of the server.
    6. In Save file to, type a path for storing the performance monitoring statistics to be dumped.

      NOTE:

      A saving path is set on the user FTP software. Users need to create a folder in the saving path. Enter the folder name in Save file to. If you need to save the file to the root directory, enter / in Save file to.

      Example: If the save path configured on the FTP is G:\ and the folder name is alarm, enter alarm in Save file to on the DeviceManager interface.

    7. Optional: Click Test, to ensure that the configured parameter is correct by dumping a performance file.
  4. Click Save.

    The Execution Result dialog box is displayed indicating that the operation succeeded.

  5. Click Close and you have finished modifying the settings for dumping performance monitoring statistics.
Translation
Download
Updated: 2019-04-17

Document ID: EDOC1000084191

Views: 86135

Downloads: 2300

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next