No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Administrator Guide 15

OceanStor 5300 V3, 5500 V3, 5600 V3, 5800 V3, and 6800 V3 Storage System V300R003

Routine maintenance activities are the most common activities for the storage device, including powering on or off the storage device, managing users, modifying basic parameters of the storage device, and managing hardware components. This document applies to the system administrators who are responsible for carrying out routine maintenance activities, monitoring the storage device, and rectifying common device faults.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring an FTP Server

Configuring an FTP Server

You can install and configure a wide range of FTP servers. This section describes how to configure an Xlight FTP server. For details about how configure other FTP servers, see the related configuration documentation.


The FTP server software installation package is ready.

The IP address to be configured can correctly communicate with the storage system.


  1. Start the Xlight FTP server software.

    The Xlight FTP Server page is displayed.

  2. Configure a virtual server.
    1. On the Xlight FTP Server page, click .

      The New Virtual Server dialog box is displayed.

    2. In the New Virtual Server dialog box, set IP Address, Port, and Protocol to the local IP address, 21, and FTP, respectively.
    3. Click OK.

      The added virtual server is displayed in the Xlight FTP Server page that is displayed.

  3. Start the virtual server.

    Select the added virtual server and click to start the server.

    You can select the added virtual server, right-click, and choose Start Server to start the server.

  4. Add a user.
    1. On the Xlight FTP Server page, click .

      The user list is displayed.

    2. Click .

      The adding users dialog box is displayed.

    3. In the dialog box, enter Username and Password and set Home Directory.
    4. Click OK.

      The user is added, and user information is displayed on the user page.

  5. Set virtual directory permissions.
    1. In the user list, select the added user and click .

      The user name page is displayed.

    2. On the navigation bar on the left, click .

      The user directory management page is displayed.

    3. Select the access directory of the added user and click .

      The Virtual Directory dialog box is displayed.

    4. In the Permission area, set permissions.
    5. Click OK.

      Virtual directory permissions are configured.

Updated: 2019-04-17

Document ID: EDOC1000084191

Views: 86733

Downloads: 2301

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next