No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Administrator Guide 15

OceanStor 5300 V3, 5500 V3, 5600 V3, 5800 V3, and 6800 V3 Storage System V300R003

Routine maintenance activities are the most common activities for the storage device, including powering on or off the storage device, managing users, modifying basic parameters of the storage device, and managing hardware components. This document applies to the system administrators who are responsible for carrying out routine maintenance activities, monitoring the storage device, and rectifying common device faults.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring Performance Monitoring Statistics

Configuring Performance Monitoring Statistics

Configure performance monitoring settings to control the sampling interval, whether or not to retain monitoring data and monitoring status on the storage device.


  • You can monitor the performance of the storage device only when the performance monitoring status is Enable.
  • In scenarios where controller software is upgraded, parts are replaced, or operations are performed on hot patches or heterogeneous support packets, the performance statistics switch is automatically disabled. After the operation, the status of the performance statistics switch will automatically restore to the pre-operation state.


  1. Log in to DeviceManager.
  2. Choose Monitor > Performance Monitoring.
  3. In the upper function pane, click Set Parameters.

    The Set Performance Monitoring Parameters dialog box is displayed.


    You can also go to the Set Performance Monitoring Parameters dialog box as follows:

    Choose Settings > Monitoring Settings > Parameter Settings.

  4. Modify performance monitoring settings.
    1. Click Disable to disable performance monitoring.

      The Execution Result dialog box is displayed indicating that the operation succeeded.

    2. Click Close.
    3. In Sampling Interval of Real-time Statistics Collection (s), type a real-time performance data sampling interval.
    4. In Sampling Interval of Historical Statistics Collection (s), type a historical performance monitoring period.
    5. Determine whether or not to save performance monitoring data on the storage device.

      If you want to store monitoring data on the storage device, select the Save monitoring date on the device check box.

    6. Click Enable.

      The Execution Result dialog box is displayed indicating that the operation succeeded.

    7. Click Close.
Updated: 2019-04-17

Document ID: EDOC1000084191

Views: 85226

Downloads: 2295

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next