No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Administrator Guide 15

OceanStor 5300 V3, 5500 V3, 5600 V3, 5800 V3, and 6800 V3 Storage System V300R003

Routine maintenance activities are the most common activities for the storage device, including powering on or off the storage device, managing users, modifying basic parameters of the storage device, and managing hardware components. This document applies to the system administrators who are responsible for carrying out routine maintenance activities, monitoring the storage device, and rectifying common device faults.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Expanding a Disk Domain

Expanding a Disk Domain

This operation allows you to increase the capacity of a disk domain.

Prerequisites

  • Disks used for capacity expansion are available.
  • You are advised to use different disk domains to create storage pools for block storage service and file storage service.

Procedure

  1. Log in to DeviceManager.
  2. Choose Provisioning > Disk Domain.
  3. Select the disk domain you want to expand and click Expand.

    The Expand Disk Domain dialog box is displayed.

  4. Select a expansion method.

    The following expansion methods are available:
    • Select All available disks to add all available disks to the disk domain.
    • Select Specify disk type and add suitable types of disks to the disk domain.
    • Select Manually Select and click Select.... On the Select Disks page, add disks from Available Disks to Selected Disks and click OK.

  5. Confirm the expansion of the disk domain.
    1. Click OK.

      The Success message box is displayed, indicating that the operation succeeded.

    2. Click OK.
Translation
Download
Updated: 2019-04-17

Document ID: EDOC1000084191

Views: 85530

Downloads: 2297

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next