No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Administrator Guide 15

OceanStor 5300 V3, 5500 V3, 5600 V3, 5800 V3, and 6800 V3 Storage System V300R003

Routine maintenance activities are the most common activities for the storage device, including powering on or off the storage device, managing users, modifying basic parameters of the storage device, and managing hardware components. This document applies to the system administrators who are responsible for carrying out routine maintenance activities, monitoring the storage device, and rectifying common device faults.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Naming an iSCSI Device and an iSCSI Initiator

Naming an iSCSI Device and an iSCSI Initiator

Both the iSCSI device name and iSCSI initiator name contain two parts: the default part and the user-defined part. Only the user-defined part can be modified. The iSCSI target name is dynamically generated based on the iSCSI device name and the identifier of a specific port. (For details about how the iSCSI target name is generated, contact your maintenance personnel.)


  1. Log in to DeviceManager.
  2. Choose Settings > Storage Settings > Block Storage Service > Name Settings.
  3. Change the iSCSI device name and initiator name.
    1. In iSCSI Device Name, enter the user-defined part of the iSCSI device name.

      The name can contain 0 to 31 characters.

    2. In iSCSI Initiator Name, enter the user-defined part of the iSCSI initiator name.

      The name can contain 0 to 31 characters.

    3. Click Save.

      The Execution Result dialog box is displayed, indicating that the operation succeeded.

    4. Click Close.
Updated: 2019-04-17

Document ID: EDOC1000084191

Views: 85292

Downloads: 2297

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next