No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Administrator Guide 15

OceanStor 5300 V3, 5500 V3, 5600 V3, 5800 V3, and 6800 V3 Storage System V300R003

Routine maintenance activities are the most common activities for the storage device, including powering on or off the storage device, managing users, modifying basic parameters of the storage device, and managing hardware components. This document applies to the system administrators who are responsible for carrying out routine maintenance activities, monitoring the storage device, and rectifying common device faults.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Checking Controller Enclosure Indicators (5600 V3/5800 V3)

Checking Controller Enclosure Indicators (5600 V3/5800 V3)

Controller enclosure indicators show the running status of the controller enclosure. By checking these indicators, you can quickly learn about the status of each component module.

Reference Standard

Controller enclosure indicators are located on the front and rear panels of the controller enclosure.

Figure 9-4 and Figure 9-5 depict the front-panel and rear-panel indicators of the controller enclosure that has been correctly powered on.
Figure 9-4  Controller enclosure front-panel indicators

1

Running/Alarm indicator on a BBU

2

Location indicator on the controller enclosure

3

Alarm indicator on the controller enclosure

4

Power indicator/Power button on the controller enclosure

5

Fan module running/alarm indicator

6

Controller power indicator

7

Controller alarm indicator

   
Table 9-5 lists the states and meanings of the controller enclosure front-panel indicators shown in Figure 9-4.
Table 9-5  Controller enclosure front-panel indicator states and their meanings

Module

No.

Indicator

Normality

Abnormality

BBU

1

Running/Alarm indicator on a BBU

  • Steady green: The BBU is fully charged.
  • Blinking green (1 Hz): The BBU is being charged.
  • Blinking green (4 Hz): The BBU is being discharged.

Steady red: The BBU is faulty.

System enclosure

2

Location indicator on the controller enclosure

  • Blinking blue: The controller enclosure is being located.
  • Off: The controller enclosure is not located.

-

3

Alarm indicator on the controller enclosure

Off: The controller enclosure is working properly.

Steady red: An alarm about the controller enclosure has been generated.

4

Power indicator/Power button on the controller enclosure

  • Steady green: The controller enclosure is powered on.
  • Blinking green (0.5 Hz): The controller enclosure is powered on for a short time.
  • Blinking green (1 Hz): The controller enclosure is in the burn-in test.
  • Blinking green (2 Hz): The controller enclosure is in the operating system boot process or in the power-off process.

Off: The controller enclosure is powered off or powered by BBUs.

Controller

5

Fan module running/alarm indicator

Steady green: Fan modules are working correctly.

  • Steady red: A fan module is faulty.
  • Off: Fan modules are powered off.

6

Controller power indicator

  • Steady green: The controller is powered on.
  • Blinking green (0.5 Hz): The controller is powered on and in the BIOS boot process.
  • Blinking green (2 Hz): The controller is in the operating system boot process.

Off: The controller cannot be detected or is powered off.

7

Controller alarm indicator

Off: The controller is working correctly.

Steady red: An alarm about the controller has been generated.

Figure 9-5  Controller enclosure rear-panel indicators

1

Running/Alarm indicator on a power module

2

Power indicator on a management module

3

Management network port Speed indicator

4

Management network port Link/Active indicator

5

Power indicator/Hot Swap button on an interface module

6

Speed indicator of a GE electrical port

7

Link/Active indicator of a GE electrical port

8

Link/Speed indicator of a 10 Gbit/s electrical port

9

Link/Speed indicator of a 10 Gbit/s FCoE port

10

Link/Speed indicator of a 16 Gbit/s Fibre Channel port

11

Link/Speed indicator of an 8 Gbit/s Fibre Channel port

12

Mini SAS HD expansion port indicator

Table 9-6 lists the states and meanings of the controller enclosure rear-panel indicators shown in Figure 9-5. This section lists only the indicator states and meanings of some interface modules. For details, see the OceanStor 5300 V3&5500 V3&5600 V3&5800 V3&6800 V3 Storage System V300R003 Product Description.
Table 9-6  Controller enclosure rear-panel indicator states and their meanings

Module

No.

Indicator

Normality

Abnormality

Power module

1

Running/Alarm indicator on a power module

  • Steady green: The power supply is normal.
  • Blinking green: The power input is normal but the device is powered off.
  • Steady red: The power module is faulty.
  • Off: No external power input is available.

Management module

2

Power indicator on a management module

  • Steady green: The module is working correctly.
  • Blinking green: The module receives a hot swap request.
  • Steady red: The module is faulty.
  • Off: The module is powered off or hot swappable.

3

Management network port Speed indicator

Steady orange: Data is being transferred at the highest rate.

Off: The data transfer speed is lower than the highest speed.

4

Management network port Link/Active indicator

  • Steady green: The port is connected properly.
  • Blinking green: Data is being transferred.

Off: The port is connected abnormally.

Interface module

5

Power indicator/Hot Swap button on an interface module

  • Steady green: The interface module is working correctly.
  • Blinking green: The interface module receives a hot swap request.
  • Steady red: The interface module is faulty.
  • Off: The interface module is powered off or swappable.

6

Speed indicator of a GE electrical port

Steady orange: The data transfer rate between the controller enclosure and the application server is 1 Gbit/s.

Off: The data transfer rate between the controller enclosure and the application server is lower than 1 Gbit/s.

7

Link/Active indicator of a GE electrical port

  • Steady green: The connection between the controller enclosure and the application server is correct.
  • Blinking green: Data is being transferred.

Off: The connection between the controller enclosure and the application server is incorrect.

8

Link/Speed indicator of a 10 Gbit/s electrical port

  • Steady blue: The data transfer rate between the storage system and the application server is 10 Gbit/s.
  • Blinking blue: Data is being transferred.
  • Steady red: The port is faulty.
  • Off: The link to the port is down.

9

Link/Speed indicator of a 10 Gbit/s FCoE port

  • Steady blue: The data transfer rate between the storage system and the application server is 10 Gbit/s.
  • Blinking blue: Data is being transferred.
  • Steady red: The port is faulty.
  • Off: The link to the port is down.

10

Link/Speed indicator of a 16 Gbit/s Fibre Channel port

  • Steady blue: The data transfer rate between the storage system and the application server is 16 Gbit/s.
  • Blinking blue: Data is being transferred.
  • Steady green: The data transfer rate between the storage system and the application server is 8 or 4 Gbit/s.
  • Blinking green: Data is being transferred.
  • Steady red: The port is faulty.
  • Off: The link to the port is down.

11

Link/Speed indicator of an 8 Gbit/s Fibre Channel port

  • Steady blue: The data transfer rate is 8 Gbit/s.
  • Blinking blue: Data is being transferred.
  • Steady green: The data transfer rate is 4 or 2 Gbit/s.
  • Blinking green: Data is being transferred.
  • Steady red: The port is faulty.
  • Off: The link to the port is down.

12

Mini SAS HD expansion port indicator

  • Steady blue: The data transfer rate between the controller enclosure and a disk enclosure is 4 x 12 Gbit/s.
  • Steady green: The data transfer rate between the controller enclosure and a disk enclosure is 4 x 6 Gbit/s or 4×3 Gbit/s.
  • Steady red: The port is faulty.
  • Off: The link to the port is down.

Procedure

  1. Check onsite controller enclosure front-panel and rear-panel indicators according to Figure 9-4 and Figure 9-5. Predetermine whether all component modules on the controller enclosure are working properly.

Exception Handling

If any module is abnormal, refer to the OceanStor 5300 V3&5500 V3&5600 V3&5800 V3&6800 V3 Storage System V300R003 Product Description to learn about detailed indicator meanings. Then, troubleshoot faults based on the detailed fault information you have obtained.

Translation
Download
Updated: 2019-04-17

Document ID: EDOC1000084191

Views: 85257

Downloads: 2297

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next