No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Administrator Guide 15

OceanStor 5300 V3, 5500 V3, 5600 V3, 5800 V3, and 6800 V3 Storage System V300R003

Routine maintenance activities are the most common activities for the storage device, including powering on or off the storage device, managing users, modifying basic parameters of the storage device, and managing hardware components. This document applies to the system administrators who are responsible for carrying out routine maintenance activities, monitoring the storage device, and rectifying common device faults.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Inspecting the Device Status Using SmartKit

Inspecting the Device Status Using SmartKit

You can use the SmartKit inspection tool to inspect the storage system based on the inspection policy you have set. Device inspection enables you to know the real-time status of the device.


The SmartKit inspection tool has been installed on the maintenance terminal.


After starting the SmartKit tool, you can obtain tool use instructions by clicking in the upper right corner of the interface.


  1. Start SmartKit.

    The SmartKit page is displayed, as shown in Figure 9-16.

    Figure 9-16  Main page of the SmartKit

  2. Add a device.
    1. Click Devices and then Add.

      The Add device step 2-1: Basic Information dialog box is displayed.

    2. Enter basic information, including the IP address and proxy. In the Add Policy and Select Proxy areas, select Specify IP Address (add a device by the IP address) and No Proxy, respectively.
    3. Enter configurations, including the user name, password, and port of the device. Click Next. In the Login Information area, enter the Username, Password, and Port of the device to be added. The default value of Port is 22.
    4. Click Finish.

      The newly added device is displayed in the device list.

  3. Inspect a device.
    1. On the main page, choose ... > MyTools > Storage > Routine Maintenance > Inspection.

      The Inspection Wizard step 5-1: Welcome dialog box is displayed.

    2. Follow the inspection wizard to set the inspection type, device to be inspected, check items, and inspection policy. After completing the settings, start the inspection.

      • You can set Inspection type to Routine inspection, Site deployment inspection, or Precaution inspection. Select the inspection type based on your requirement.
      • The storage system can check the hardware status, software status, value-added services, and alarms.

    3. In the Inspection Wizard step 5-5: Start Inspection dialog box, click Finish.
  4. Check the inspection results.
    • If the value of Check result is Passed, you have completed the inspection.
    • If the value of Check result is Not passed, the Information dialog box is displayed.
      1. Read the information in the Information dialog box and click OK.

        The Information Collection dialog box is displayed.

      2. Click Collect to start collecting device information.
      3. Save the collected log information and inspection result and contact Huawei technical engineers.
Updated: 2019-04-17

Document ID: EDOC1000084191

Views: 86601

Downloads: 2301

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next