No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Administrator Guide 15

OceanStor 5300 V3, 5500 V3, 5600 V3, 5800 V3, and 6800 V3 Storage System V300R003

Routine maintenance activities are the most common activities for the storage device, including powering on or off the storage device, managing users, modifying basic parameters of the storage device, and managing hardware components. This document applies to the system administrators who are responsible for carrying out routine maintenance activities, monitoring the storage device, and rectifying common device faults.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Importing the Syslog Certificate and CA Certificate

Importing the Syslog Certificate and CA Certificate

This chapter introduces how to import the Syslog certificate and CA certificate on the storage system to active the Syslog certificate.


  • The signed certificate and CA certificate already exist.
  • If the certificate file is exported and signed by a third-party tool, ensure that the private key file exists.


If the certificate file is exported and signed by a third-party tool, import the private key file when you import the activated certificate and CA certificate.


  1. Log in to DeviceManager.
  2. Choose Settings > Storage Settings > Value-added Service Settings > Credential Management.
  3. Import and activate the signed certificate.
    1. After the certificate has been signed by the server, click Import and Activate.

      The Import Certificate dialog box is displayed.

    2. Set the certificate type to Certificate of Syslog and import the signed certificate and CA certificate. Table 8-13 describes related parameters.

      Table 8-13  Add certificate parameters



      Example Value

      Certificate Type

      Certificate types.


      Certificate of Syslog

      Certificate File

      Certificate file that has been exported and signed.



      CA Certificate File

      Certificate file of a server.



      Private Key File

      Private key file of a device.



    3. Click OK.
      The Warning dialog box is displayed.
    4. Confirm the information of the dialog box and select I have read and understood the consequences associated with this operation. Then click OK.
      The Success dialog box is displayed.
    5. Click OK.
      The certificate has been successfully imported and activated.
Updated: 2019-04-17

Document ID: EDOC1000084191

Views: 86560

Downloads: 2301

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next