No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Administrator Guide 15

OceanStor 5300 V3, 5500 V3, 5600 V3, 5800 V3, and 6800 V3 Storage System V300R003

Routine maintenance activities are the most common activities for the storage device, including powering on or off the storage device, managing users, modifying basic parameters of the storage device, and managing hardware components. This document applies to the system administrators who are responsible for carrying out routine maintenance activities, monitoring the storage device, and rectifying common device faults.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring an SMTP Server

Configuring an SMTP Server

The email notification function is available only when the SMTP server runs correctly. This section describes how to configure a Winmail server.


The SMTP server software installation package is ready.

The IP address to be configured can correctly communicate with the storage system.


  1. Install the Winmail Server software.
  2. Log in to the Winmail Server management tool.
    1. Open the Start menu and find Magic Winmail in Programs.
    2. Run Magic Winmail Administration tool. The Connect Server dialog box is displayed.
    3. Set the Username and Password.
    4. Click OK to log in to the management tool.
  3. Check operating status of the email system.
    1. In the navigation tree of the Winmail Server management tool, choose System Setup > Services.
    2. On the Services page, check whether SMTP, POP3, HTTP, and ADMIN services are working correctly.

      If the indicator is steady green, the services are working correctly. If the indicator is steady red, the services are working incorrectly.

  4. Set a domain name.
    1. In the navigation tree, choose Domain Setting > Domains.
    2. On the Domains page, click Add.

      The Domain dialog box is displayed.

    3. In the Domain dialog box, set Domain name, Description, Storage of all mailbox, Total of mailbox, and Mailbox min. quato.
    4. Click OK.

      The created domain name is displayed in the domain name list.

  5. Set an email account.
    1. In the navigation tree, choose User and Group > Users.
    2. On the Users page, click Add.

      The General dialog box is displayed.

    3. In the General dialog box, set User name, Password, and Confirm password.
    4. Click Next.

      The Group page is displayed.

    5. Optional: Select a group to which you want to add the user.
    6. Click Next.

      The Right page is displayed.

    7. On the Right page, configure parameters in the Right and Auto forward areas.
    8. Click Next.

      The Quota page is displayed.

    9. On the Quota page, set Mailbox quota, Number of mails, and Warning limit.
    10. Click Finish.

      The user and email account are configured. The user is displayed in the user list of the Users page.

Follow-up Procedure

After configuring the email server, you need to configure an email address for receiving notifications. The detailed configuration steps vary depending on your email version.
Updated: 2019-04-17

Document ID: EDOC1000084191

Views: 86596

Downloads: 2301

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next