No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Administrator Guide 15

OceanStor 5300 V3, 5500 V3, 5600 V3, 5800 V3, and 6800 V3 Storage System V300R003

Routine maintenance activities are the most common activities for the storage device, including powering on or off the storage device, managing users, modifying basic parameters of the storage device, and managing hardware components. This document applies to the system administrators who are responsible for carrying out routine maintenance activities, monitoring the storage device, and rectifying common device faults.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Creating a Microsoft Exchange Snapshot

Creating a Microsoft Exchange Snapshot

After a snapshot is created and activated for a Microsoft Exchange instance, a data duplicate group of the Microsoft Exchange instance is generated. Users can read and write duplicates in the duplicate group without changing the source data. The data security is enhanced.

Prerequisites

  • At least one Microsoft Exchange instance has been created in the storage system.
  • The snapshot license is valid.

Context

The snapshot created for a Microsoft Exchange instance is actually a snapshot group. Since when you create a snapshot for a Microsoft Exchange instance, you actually create a snapshot for each LUN contained in the Microsoft Exchange instance. You can choose Data Protection > Snapshot to view the snapshot of each LUN contained in the Microsoft Exchange instance.

Procedure

  1. Log in to DeviceManager.
  2. Choose Provisioning > Application > Microsoft Exchange.
  3. Select the Microsoft Exchange instance for which you want to create a snapshot and click Create Snapshot.

    The Create Snapshot dialog box is displayed.

  4. Set snapshot parameters.

    Table 7-5 describes related parameters.

    Table 7-5  Parameters of a Microsoft Exchange snapshot

    Parameter

    Description

    Value

    Name

    Name of a Microsoft Exchange snapshot.
    • The name must be unique.
    • Contains only letters, digits, underscores (_), periods (.), and hyphens (-).
    • Contains 1 to 31 characters.

    [Example]

    ExchangeApp_001_Snap_000

    Description

    Description of a Microsoft Exchange snapshot.

    [Example]

    -

    Activate Now

    If this option is selected, a snapshot is activated immediately after creation.

    [Example]

    Activate Now

  5. Confirm your settings.
    1. Click OK.

      The Execution Result dialog box is displayed indicating operation success.

    2. Click Close.

Follow-up Procedure

After Microsoft Exchange snapshots are created, you can select a Microsoft Exchange instance and click the Snapshot tab in Details. Then you can operate the snapshot of the Microsoft Exchange instance based on service requirements.

Translation
Download
Updated: 2019-04-17

Document ID: EDOC1000084191

Views: 86119

Downloads: 2300

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next