No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Administrator Guide 15

OceanStor 5300 V3, 5500 V3, 5600 V3, 5800 V3, and 6800 V3 Storage System V300R003

Routine maintenance activities are the most common activities for the storage device, including powering on or off the storage device, managing users, modifying basic parameters of the storage device, and managing hardware components. This document applies to the system administrators who are responsible for carrying out routine maintenance activities, monitoring the storage device, and rectifying common device faults.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Changing a Service IP Address

Changing a Service IP Address

To report alarm messages to other network management systems or storage devices, change the existing server addresses to the server addresses of those systems or devices.

Context

  • Changing server addresses is unavailable to read-only users.
  • If the server address is not on the management network segment, configure routes to interconnect the storage devices with the servers linked to the server addresses.

    Before changing server addresses, ensure that no alarm message is being reported to network management systems or storage devices linked to those addresses. Alarm messages being reported at the time of the change will be lost.

Procedure

  1. Log in to DeviceManager.
  2. Choose Settings > Alarm Settings.
  3. Change trap server addresses.
    1. In the navigation tree, choose Trap Server Address Management.
    2. In the trap server address list, select the trap server address that you want to change and click Modify.

      The Modify Server Address dialog box is displayed.

    3. Change the trap server addresses.
  4. Confirm the change of trap server addresses.
    1. Click OK.
    2. Click Save.

      The Execution Result dialog box is displayed, indicating the operation result.

    3. Click Close.
Translation
Download
Updated: 2019-04-17

Document ID: EDOC1000084191

Views: 85474

Downloads: 2297

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next