No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Administrator Guide 15

OceanStor 5300 V3, 5500 V3, 5600 V3, 5800 V3, and 6800 V3 Storage System V300R003

Routine maintenance activities are the most common activities for the storage device, including powering on or off the storage device, managing users, modifying basic parameters of the storage device, and managing hardware components. This document applies to the system administrators who are responsible for carrying out routine maintenance activities, monitoring the storage device, and rectifying common device faults.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Viewing Ethernet Port Details

Viewing Ethernet Port Details

By viewing basic information about an Ethernet port, you can learn about its IP address, subnet mask, and maximum transmission unit (MTU).

Procedure

  1. Log in to DeviceManager.
  2. Choose Provisioning > Port > Ethernet Ports.
  3. View details about an Ethernet port. The related parameters are described in Table B-3.



    Table B-3  Ethernet port parameters

    Parameter

    Description

    Value

    Name

    Name of an Ethernet port.

    [Example]

    P0

    Location

    Location of an Ethernet port.

    [Example]

    CTE0.A.IOM0.P0

    Health Status

    Health status of an Ethernet port.

    [Example]

    Normal

    Running Status

    Running status of an Ethernet port.

    [Example]

    Link up

    MAC Address

    MAC address of an Ethernet port.

    [Example]

    04:f9:38:95:88:f1

    IPv4 Address/Mask

    IPv4 address and mask of an Ethernet port.

    [Example]

    192.168.100.11/255.255.255.0

    IPv6 Address/Prefix

    IPv6 address and prefix of an Ethernet port.

    [Example]

    fc::1234/64

    Working Rate (Gbit/s)

    Transfer rate of an Ethernet port.

    [Example]

    1

    Max. Working Rate (Gbit/s)

    Maximum transfer rate of an Ethernet port.

    [Example]

    1

    MTU (Byte)

    Maximum transmission unit (MTU) of an Ethernet port.

    [Example]

    1500

    Bond Name

    Name of the bond port.

    [Example]

    as

    Port Switch

    Isolation status of an Ethernet port. Possible values are Enable and Disable. When Port Switch is set to Disable, the port cannot be used.

    [Example]

    Enable

    ID

    ID of an Ethernet port.

    [Example]

    139267

  4. Optional: Select a port and the details about the initiator to which the port belongs will be displayed in the Initiator area, as shown in Table B-4.

    Table B-4  Initiator parameter

    Parameter

    Description

    Type

    Type of an initiator.

    Alias

    Alias of an initiator.

    WWPN/IQN

    The unique identifier of an initiator.

    Status

    Status of an initiator.

    Idle or Not

    Whether initiator is idle or not.

  5. Optional: Associate an initiator with a host.
    1. Select an initiator that you want to associate with a host.
    2. Click Associate Host.

      The Associate Host dialog box is displayed.

    3. Select a host with which you want to associate the initiator and click OK.

      The system associates the host with the initiator.

  6. Optional: Select an initiator and click Create Host to create a new host and associate it with the selected initiator. Table B-5 describes the related parameters.

    Table B-5  Host parameters

    Parameter

    Description

    Value

    Name

    Name of a host.

    Name a host in accordance with the following rules so that the host is available to host applications.
    • The name must be unique.
    • The name can contain only letters, digits, periods (.), underscores (_), and hyphens (-).
    • The name contains 1 to 31 characters.

    [Example]

    Host002

    Description

    Description of a host.

    [Example]

    -

    OS

    Operating system used by a host.

    [Value range]

    Possible values are Linux, Windows, Solaris, HP-UX, AIX, XenServer, Mac OS, VMware ESX and Windows Server 2012.
    NOTE:
    Use Windows Server 2012 operating system only when the host needs to access the thin LUN and use the space reclaiming function.

    [Example]

    Windows

    IP Address

    IP address of a host.

    [Example]

    192.168.1.100

    Device Location

    Location of a host.

    [Example]

    Chengdu

Translation
Download
Updated: 2019-04-17

Document ID: EDOC1000084191

Views: 86685

Downloads: 2301

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next