No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Administrator Guide 15

OceanStor 5300 V3, 5500 V3, 5600 V3, 5800 V3, and 6800 V3 Storage System V300R003

Routine maintenance activities are the most common activities for the storage device, including powering on or off the storage device, managing users, modifying basic parameters of the storage device, and managing hardware components. This document applies to the system administrators who are responsible for carrying out routine maintenance activities, monitoring the storage device, and rectifying common device faults.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring Disk Encryption Services

Configuring Disk Encryption Services

Before configuring encrypted disk domains, configure the key service to ensure that the disk encryption function is normal.


A system supports up to two key servers.


  1. Log in to DeviceManager.
  2. Choose Settings > Storage Settings > Value-added Service Settings > Key Server.
  3. Click Add.

    The Add Server dialog box is displayed.

  4. Type key server parameters. Table 3-27 describes the related parameters.

    Table 3-27  Key server parameters



    Example Value

    Server Type

    Type of the key server.


    SafeNet KMIP


    The domain name or IP address of a key server.



    Port of a key server IP address.

    [Value range]

    1 to 65535



  5. Click OK.
  6. Click Save.
  7. Optional: Select a key server that you want to test and click Test to check whether the key server is configured successfully.
  8. Optional: Select a key server that you want to delete and click Delete.
Updated: 2019-04-17

Document ID: EDOC1000084191

Views: 85737

Downloads: 2300

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next