No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Administrator Guide 15

OceanStor 5300 V3, 5500 V3, 5600 V3, 5800 V3, and 6800 V3 Storage System V300R003

Routine maintenance activities are the most common activities for the storage device, including powering on or off the storage device, managing users, modifying basic parameters of the storage device, and managing hardware components. This document applies to the system administrators who are responsible for carrying out routine maintenance activities, monitoring the storage device, and rectifying common device faults.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Checking Remote Devices

Checking Remote Devices

You can learn about the health and running status of a remote device connecting to the storage device by using the DeviceManager.

Impact on the System

Faulty remote devices may cause data backup interruption or data loss.

Reference Standard

If remote devices are working properly, their Health Status is Normal and Running Status is Link Up on the DeviceManager.

Procedure

  1. Log in to DeviceManager.
  2. Choose Data Protection > Remote Device.
  3. On the Remote Device page, view the detailed information about the desired remote device.

    Table 9-25 describes associated status parameters.

    Table 9-25  Remote device status parameters and their meanings

    Parameter

    Description

    Health Status

    Health status of a remote device. The value can be:
    • Normal: The remote device is working properly.
    • Faulty: The remote device is working improperly.

    Running Status

    Running status of a remote device. The value can be Link up or Link down.

Follow-up Procedure

For a remote device, if its Health Status is Fault or Running Status is Link Down, contact our technical support engineers for troubleshooting.

Translation
Download
Updated: 2019-04-17

Document ID: EDOC1000084191

Views: 85923

Downloads: 2300

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next