No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Command Reference 10

OceanStor 5300 V3, 5500 V3, 5600 V3, 5800 V3, and 6800 V3 Storage System V300R003

"Based on the CLI, this document describes how to use various commands classified by functions and how to set the CLI and manage the storage system through these commands. The document that you browse online matches the latest C version of the product. Click Download to download documents of other C versions."
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
delete mapping_view

delete mapping_view


The delete mapping_view command is used to delete mapping views.


delete mapping_view mapping_view_id=?





mapping_view_id=? ID of a mapping view.

To obtain the value, run "show mapping_view general".



Usage Guidelines

  • Before running this command, ensure that the selected mapping view is exactly the one you want to delete and that no service associated with the hosts in the mapping view is running.
  • To delete a mapping view, you must remove all of the host groups, LUN groups and port groups in the mapping view, and the in-band commands of the mapping view must be disabled. The status of in-band commands can be changed by running "change mapping_view".


To delete mapping view "1", run the following command:

admin:/>delete mapping_view mapping_view_id=1
WARING: You are about to delete mapping view. This operation cannot be undone. This operation will delete the information about the mapping view from the system.
Suggestion: Before performing this operation, ensure that the selected mapping view is no longer necessary.
Have you read warning message carefully?(y/n)y
Are you sure you really want to perform the operation?(y/n)y
Command executed successfully.

System Response


Updated: 2019-07-22

Document ID: EDOC1000084195

Views: 367808

Downloads: 1594

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next