No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Command Reference 10

OceanStor 5300 V3, 5500 V3, 5600 V3, 5800 V3, and 6800 V3 Storage System V300R003

"Based on the CLI, this document describes how to use various commands classified by functions and how to set the CLI and manage the storage system through these commands. The document that you browse online matches the latest C version of the product. Click Download to download documents of other C versions."
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
show failover_group count

show failover_group count

Function

The show failover_group count command is used to display the number of failover groups on the storage system.

Format

show failover_group count

Parameters

None

Level

Guest

Usage Guidelines

None.

Example

To show the number of failover groups, run the following command:

admin:/>show failover_group count
Failover Group Number : 9

System Response

The following table describes the parameter meanings.

Parameter

Meaning

Failover Group Number

Indicates the number of failover groups.

Translation
Download
Updated: 2019-07-22

Document ID: EDOC1000084195

Views: 364891

Downloads: 1594

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next