No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Command Reference 10

OceanStor 5300 V3, 5500 V3, 5600 V3, 5800 V3, and 6800 V3 Storage System V300R003

"Based on the CLI, this document describes how to use various commands classified by functions and how to set the CLI and manage the storage system through these commands. The document that you browse online matches the latest C version of the product. Click Download to download documents of other C versions."
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
create clone

create clone

Function

The create clone command is used to create clone tasks.

Format

create clone name=? lun_id=? [ clone_id=? ]

Parameters

Parameter

Description

Value

name=? Name of a clone task that you want to create.

The value contains 1 to 31 characters including digits, letters, underscores (_), hyphens (-), and periods (.).

lun_id=? ID of a primary logical unit number (LUN).

To obtain the value, run "show lun general".

clone_id=? ID of a clone task.

The value is an integer ranging from 0 to 1023.

This parameter will be auto-assigned if you do not assign it a value.

Level

Administrator

Usage Guidelines

None.

Example

  • To create a clone task, where the name of the task is "newclone002", the primary LUN is LUN "4", and the task will be automatically assigned an ID.

    admin:/>create clone name=newclone002 lun_id=4
    Command executed successfully.
  • To create a clone task, where the name of the task is" myclone", the primary LUN is LUN "3", and the task will be assigned ID "2".

    admin:/>create clone name=myclone lun_id=3 clone_id=2
    Command executed successfully.

System Response

None

Translation
Download
Updated: 2019-04-04

Document ID: EDOC1000084195

Views: 273324

Downloads: 1556

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next