No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Command Reference 10

OceanStor 5300 V3, 5500 V3, 5600 V3, 5800 V3, and 6800 V3 Storage System V300R003

"Based on the CLI, this document describes how to use various commands classified by functions and how to set the CLI and manage the storage system through these commands. The document that you browse online matches the latest C version of the product. Click Download to download documents of other C versions."
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
show port initiator

show port initiator


The show port initiator command is used view the WWN information of all initiators that map to a port.


show port initiator port_type=? port_id=?





port_type=? Port type.

The value can be "FC", "ETH", "BOND_PORT","FCoE",or"IB", where:

  • "FC": Fibre Channel port.
  • "ETH": Ethernet port (including an iSCSI host port and management port).
  • "BOND_PORT": bond port.
  • "FCoE": FCoE port.
  • "IB": IB port.
port_id=? ID of a port.

The value can be:

  • When the "port_type" value is "ETH", "FC", or "FCoE", you can run "show port general" without parameters to obtain the port ID.
  • When the "port_type" value is "BOND_PORT", you can run "show bond_port" to obtain the port ID.
  • When the "port_type" value is "IB", you can run "show ib_port general" to obtain the port ID.



Usage Guidelines



View information about all initiators that map to port "ENG0.B3.P0".

admin:/>show port initiator port_type=FC port_id=ENG0.B3.P0
WWN               Running Status    Free  Alias  Host ID   Multipath Type 
----------------  ---------------   ----  -----  -------   -------------- 
21000024ff36cedf  Online            Yes   --     --        Default 

System Response


Updated: 2019-07-22

Document ID: EDOC1000084195

Views: 365649

Downloads: 1594

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next