No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Command Reference 10

OceanStor 5300 V3, 5500 V3, 5600 V3, 5800 V3, and 6800 V3 Storage System V300R003

"Based on the CLI, this document describes how to use various commands classified by functions and how to set the CLI and manage the storage system through these commands. The document that you browse online matches the latest C version of the product. Click Download to download documents of other C versions."
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
change hypervault general

change hypervault general


The change hypervault general command is used to modify the settings of a specified hypervault.


change hypervault general hypervault_id=? { recover_policy=? | backup_rate=? } *





hypervault_id=? ID of the HyperVault object.

To obtain the value, run the "show hypervault general" command without parameters.

recover_policy=? Error rectifying policy.

The value is "automatic" or "manual",where:

  • "automatic":The hypervault will automatically recover, and data will be automatically backup from the primary device to the secondary device.
  • "manual":The hypervault needs to be recovered manually. Data will not be automatically backup from the primary device to the secondary device.
The default value is "manual".
backup_rate=? Backup rate.

The value is "low", "middle", "high", or "highest", where:

  • "low":slow backup speed.
  • "middle":medium backup speed.
  • "high":fast backup speed.
  • "highest":the fastest backup speed.
The default value is "middle".



Usage Guidelines



Change the recovery policy of hypervault "9747215445131264" to "automatic".

admin:/>change hypervault general hypervault_id=9747215445131264 recover_policy=automatic
Command executed successfully.

System Response


Updated: 2019-07-22

Document ID: EDOC1000084195

Views: 362610

Downloads: 1590

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next