No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Command Reference 10

OceanStor 5300 V3, 5500 V3, 5600 V3, 5800 V3, and 6800 V3 Storage System V300R003

"Based on the CLI, this document describes how to use various commands classified by functions and how to set the CLI and manage the storage system through these commands. The document that you browse online matches the latest C version of the product. Click Download to download documents of other C versions."
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
remove host vhost_initiator

remove host vhost_initiator

Function

The remove host vhost_initiator command is used to remove a vhost initiator from a host.

Format

remove host vhost_initiator host_id=? wwn=?

Parameters

Parameter

Description

Value

wwn=? Vhost initiator WWN.

To obtain the value, run the "show vhost_initiator general" command without parameters.

host_id=? Host ID.

To obtain the value, run the "show host general" command.

Level

Administrator

Usage Guidelines

Only OceanStor 5300 V3 (32 GB memory), 5500 V3 (48 GB/64 GB memory), 5600 V3 (64 GB/128 GB memory), and 5800 V3 (128 GB/256 GB memory) support this command.

Example

Remove a vhost initiator from host "0".

admin:/>remove host vhost_initiator host_id=0 wwn=21003400a302671a
DANGER: You are about to remove initiator from host. This operation will interrupt related ongoing services.
Suggestion: Before performing this operation, ensure that the selected host and initiators are correct and stop services on the host.
Have you read danger alert message carefully?(y/n)y
Are you sure you really want to perform the operation?(y/n)y
Command executed successfully.

System Response

None

Translation
Download
Updated: 2019-04-04

Document ID: EDOC1000084195

Views: 279313

Downloads: 1559

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next