No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Command Reference 10

OceanStor 5300 V3, 5500 V3, 5600 V3, 5800 V3, and 6800 V3 Storage System V300R003

"Based on the CLI, this document describes how to use various commands classified by functions and how to set the CLI and manage the storage system through these commands. The document that you browse online matches the latest C version of the product. Click Download to download documents of other C versions."
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
show ib_initiator general

show ib_initiator general


The show ib_initiator general command is used to query the properties of an InfiniBand initiator.


show ib_initiator general [ wwn=? ] [ is_free=? ] [ host_id=? ]





wwn=? Initiator WWN.

To obtain the value, run the "show ib_initiator general" command.

host_id=? Host ID.

To obtain the value, run the "show host general" command.

is_free=? Whether the initiator is free.

The value can be "yes" or "no", where:

  • yes: The initiator is free and can be added to a host.
  • no: The initiator is being used and cannot be added to other hosts.



Usage Guidelines

You can choose only one of the following three parameters: "wwn", "is_free", and "host_id".


Query the properties of an InfiniBand initiator.

admin:/>show ib_initiator general
  WWN               Name  Health Status  Running Status  Is Free  Multi Path Type  Failover Mode  Path Type   
  ----------------  ----  -------------  --------------  -------  ---------------  -------------  ---------------------
  000000000000000d  21    Normal         Online          No       Default     --        --                           
  0000000000005678  new   Normal         Offline         Yes      Third-party       Common ALUA         Optimized

System Response

The following table describes the parameter meanings.




Initiator WWN.


Initiator name.

Health Status

Initiator health status.

Running Status

Initiator running status.

Is Free

Whether the initiator is free.

Multi Path Type

Type of the initiator's multipath.

Failover Mode

Failover mode of the initiator.

Path Type

Path type of the initiator.

Updated: 2019-07-22

Document ID: EDOC1000084195

Views: 364283

Downloads: 1590

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next