No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Command Reference 10

OceanStor 5300 V3, 5500 V3, 5600 V3, 5800 V3, and 6800 V3 Storage System V300R003

"Based on the CLI, this document describes how to use various commands classified by functions and how to set the CLI and manage the storage system through these commands. The document that you browse online matches the latest C version of the product. Click Download to download documents of other C versions."
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
create on_access_scan general

create on_access_scan general

Function

The create on_access_scan general command is used to create the On-Access scanning function for a specified file system.

Format

create on_access_scan general file_system_id=? file_system_name=? scan_policy_id=? [ scan_enabled=? ]

Parameters

Parameter

Description

Value

file_system_id=? File system ID.

To obtain the value, run the "show file_system general" command.

file_system_name=? File system name.

To obtain the value, run the "show file_system general" command.

scan_policy_id=? Scanning policy ID.

To obtain the value, run the "show antivirus_scan policy" command.

scan_enabled=? Switch of On-Access scanning.

Possible values are "yes" and "no", where:

  • "yes": to enable On-Access scanning.
  • "no": to disable On-Access scanning.

Level

Administrator

Usage Guidelines

  • Before running this command, ensure that the system is running correctly.
  • Before running this command, ensure that the Anti-Virus module is running correctly.

Example

Set the scanning policy for the file system whose ID is "0" and name is "fs01" to On-Access scanning where the scanning policy ID is "0" and the switch is set to "no".

admin:/>create on_access_scan general file_system_id=0 file_system_name=fs01 scan_policy_id=0 scan_enabled=no
 
Command executed successfully.

System Response

None

Translation
Download
Updated: 2019-07-22

Document ID: EDOC1000084195

Views: 362527

Downloads: 1590

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next