No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Command Reference 10

OceanStor 5300 V3, 5500 V3, 5600 V3, 5800 V3, and 6800 V3 Storage System V300R003

"Based on the CLI, this document describes how to use various commands classified by functions and how to set the CLI and manage the storage system through these commands. The document that you browse online matches the latest C version of the product. Click Download to download documents of other C versions."
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
change logical_port failback

change logical_port failback


The change logical_port failback command is uesed to failback logical port.


change logical_port failback logical_port_name=?





logic_port_name=? Logical port name. The value is 1 to 31 characters in length. Characters include numbers, letters, periods (.), underscores (_), and hyphens (-).

To obtain the value, run "show logical_port general".



Usage Guidelines

  • Before performing this operation, determine whether the modification is necessary.


To failback logical port lif1.

admin:/>change logical_port failback logical_port_name=lif1
DANGER: You are about to perform logical port failback. This operation may interrupt services or cause service exceptions.
Suggestion: Before performing this operation, determine whether the modification is necessary. 
Have you read danger alert message carefully?(y/n)Y 
Are you sure you really want to perform the operation?(y/n)Y 
Command executed successfully.

System Response


Updated: 2019-07-22

Document ID: EDOC1000084195

Views: 361865

Downloads: 1588

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next