No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Command Reference 10

OceanStor 5300 V3, 5500 V3, 5600 V3, 5800 V3, and 6800 V3 Storage System V300R003

"Based on the CLI, this document describes how to use various commands classified by functions and how to set the CLI and manage the storage system through these commands. The document that you browse online matches the latest C version of the product. Click Download to download documents of other C versions."

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
change hyper_metro_pair start

change hyper_metro_pair start


The change hyper_metro_pair start command is used to forcibly start a HyperMetro pair.


change hyper_metro_pair start pair_id=?





pair_id=? ID of the HyperMetro pair.

Run the "show hyper_metro_pair general" command to obtain the value.



Usage Guidelines



To forcibly start HyperMetro pair "1", run the following command.

admin:/>change hyper_metro_pair start pair_id=1
DANGER: You are going to forcibly start host access of a member LUN in a HyperMetro pair on the local storage array.
Before performing this operation, ensure that host access at the remote site is stopped. Otherwise, data loss may occur.
Suggestion: Before performing this operation, disconnect the storage array at the remote site from hosts.
Have you read danger alert message carefully?(y/n)y
Are you sure you really want to perform the operation?(y/n)y
Command executed successfully.

System Response


Updated: 2019-07-22

Document ID: EDOC1000084195

Views: 426156

Downloads: 1632

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next