No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Command Reference 10

OceanStor 5300 V3, 5500 V3, 5600 V3, 5800 V3, and 6800 V3 Storage System V300R003

"Based on the CLI, this document describes how to use various commands classified by functions and how to set the CLI and manage the storage system through these commands. The document that you browse online matches the latest C version of the product. Click Download to download documents of other C versions."
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
remove host_group host

remove host_group host


remove host_group host command is used to remove a specified host from a host group.


remove host_group host host_group_id=? host_id_list=?





host_group_id=? Host group ID.

To obtain the value, run "show host_group general".

host_id_list=? ID of a host that you want to remove.
  • To obtain the value, run "show host_group host".
  • When multiple hosts need to be removed, separate these host IDs with commas (,), or separate host ID range with hyphens(-), such as: 0,5-8.



Usage Guidelines

After a host is removed from a host group, it is no longer in the host group and can not be managed by the host group.


Remove host "1" from host group "1".

admin:/>remove host_group host host_group_id=1 host_id_list=1
WARNING: You are about to remove the host from its host group. This operation will disable the host from accessing LUNs associated with its host group.
Suggestion: Before performing this operation, ensure that the selected host and host group are correct and stop services of the hosts running on LUNs associated with the host group.
Have you read warning message carefully?(y/n)y
Are you sure you really want to perform the operation?(y/n)y
Remove host 1 from host group successfully.

System Response


Updated: 2019-07-22

Document ID: EDOC1000084195

Views: 367802

Downloads: 1594

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next