No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Command Reference 10

OceanStor 5300 V3, 5500 V3, 5600 V3, 5800 V3, and 6800 V3 Storage System V300R003

"Based on the CLI, this document describes how to use various commands classified by functions and how to set the CLI and manage the storage system through these commands. The document that you browse online matches the latest C version of the product. Click Download to download documents of other C versions."
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
change vm_file transference

change vm_file transference


The change vm_file transference command is used to transfer files between devices.


change vm_file transference file_type=? file_name=? src_vm_fs_id=? des_vm_fs_id=?





file_type=? The file type to be operated.

The value can be:

  • ISO indicates a iso file.
  • vm_template indicates a virtual machine template file.
  • vmtools indicates a virtual machine upgrade file.
file_name=? The file name to be operated.

To obtain the value, run the "show vm_iso general/show vm_template general/show vmtools general" command without parameters.

src_vm_fs_id=? The ID of the VM file system where the file to be transfered is stored.

To obtain the value, run the "show vm_fs general" command without parameters.

des_vm_fs_id=? The target file system ID that the file will be transfered to.

To obtain the value, run the "show vm_fs general" command without parameters.



Usage Guidelines

Only OceanStor 5300 V3 (32 GB memory), 5500 V3 (48 GB/64 GB memory), 5600 V3 (64 GB/128 GB memory), and 5800 V3 (128 GB/256 GB memory) support this command.


  • Tranfer a iso file from file system 0 to file system 1.

    admin:/>change vm_file transference file_type=ISO file_name=win7.iso src_vm_fs_id=0 des_vm_fs_id=1
    Command send successfully.
  • Tranfer a template file from file system 1 to file system 0.

    admin:/>change vm_file transference file_type=vm_template file_name=testB.img src_vm_fs_id=1 des_vm_fs_id=0
    Command send successfully.

System Response


Updated: 2019-07-22

Document ID: EDOC1000084195

Views: 368083

Downloads: 1594

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next