No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Command Reference 10

OceanStor 5300 V3, 5500 V3, 5600 V3, 5800 V3, and 6800 V3 Storage System V300R003

"Based on the CLI, this document describes how to use various commands classified by functions and how to set the CLI and manage the storage system through these commands. The document that you browse online matches the latest C version of the product. Click Download to download documents of other C versions."
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
show performance mode

show performance mode


The show performance mode command is used to query the performance statistical modes of the current system.


show performance mode [mode=?]





mode=? Mode name.

To obtain the value, run the "show performance mode" command without parameters.



Usage Guidelines

  • Run the "show performance mode" command to query all the performance statistical modes.
  • Run the "show performance mode mode=?" command to query a specific performance statistical mode.


  • Querying all the performance statistical modes.

    admin:/>show performance mode 
      Mode Name           Statistical Object  
      ------------------  ------------------  
      controller_default  Controller          
      controller_san      Controller          
      controller_nas      Controller          
      controller_disk     Controller
  • Querying the performance statistical mode whose name is controller_default.

    admin:/>show performance mode mode=controller_default
      Mode Name        : controller_default             
      Statistic Object : Controller                     
      Statistical Item : CPU Usage(%)
                         SCSI IOPS (IO/s)
                         ISCSI IOPS (IO/s)
                         File OPS
                         NFS operation count per second
                         CIFS operation count per second
                         Total Disk IOPS(IO/s)
                         Read Bandwidth(MB/s)
                         Write Bandwidth(MB/s)
                         % Hit
                         Cache Water(%)

System Response

The following table describes the parameter meanings.



Mode Name

Mode name.

Statistic Object

Performance statistical object.

Statistical Item

Performance statistical data type.

Updated: 2019-07-22

Document ID: EDOC1000084195

Views: 361737

Downloads: 1588

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next