No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Command Reference 10

OceanStor 5300 V3, 5500 V3, 5600 V3, 5800 V3, and 6800 V3 Storage System V300R003

"Based on the CLI, this document describes how to use various commands classified by functions and how to set the CLI and manage the storage system through these commands. The document that you browse online matches the latest C version of the product. Click Download to download documents of other C versions."
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
show host general

show host general


The show host general command is used to query the information on hosts.


show host general [ host_id=? ]





host_id=? ID of a host.

To obtain the value, run "show host general" without parameters.



Usage Guidelines

  • To query the information on existing hosts, run show host general.
  • To query the information on a specific host, run show host general host_id=?.


  • To query the information on existing hosts, run the following command.

    admin:/>show host general
    ID Name Health Status Operating System IP Address Model Location
    --- ----- ------------  ----------------  ----------- ----- --------
    0 Host000 Normal Windows --
    1 Host001 Normal Windows --
    2 newhost001 Normal Linux -- 2058 newlocation
    3 newhost002 Normal Linux 2458 newlocation
    4 Host004 Normal Windows --
  • To query the information on host "1", run the following command.

    admin:/>show host general host_id=1
    ID : 1
    Name : Host001
    Health Status : Normal
    Operating System : Windows
    IP Address : --
    Model :
    Network Name :
    Location :

System Response


Updated: 2019-07-22

Document ID: EDOC1000084195

Views: 362608

Downloads: 1590

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next