No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Command Reference 10

OceanStor 5300 V3, 5500 V3, 5600 V3, 5800 V3, and 6800 V3 Storage System V300R003

"Based on the CLI, this document describes how to use various commands classified by functions and how to set the CLI and manage the storage system through these commands. The document that you browse online matches the latest C version of the product. Click Download to download documents of other C versions."
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
remove hyper_metro_consistency_group pair

remove hyper_metro_consistency_group pair


The remove hyper_metro_consistency_group pair command is used to delete a pair from a HyperMetro consistency group.


remove hyper_metro_consistency_group pair consistency_group_id=? pair_id=?





consistency_group_id=? ID of the HyperMetro consistency group.

Run the "show hyper_metro_consistency_group general" command without any parameters to obtain the value.

pair_id=? ID of the HyperMetro pair.

Run the "show hyper_metro_consistency_group pair" command with consistency group id to obtain the value.



Usage Guidelines



To delete pair 1 from consistency group 2, run the following command.

admin:/>remove hyper_metro_consistency_group pair consistency_group_id=2 pair_id=1
WARNING: You are about to remove a pair from the HyperMetro consistency group. 
After the pair is removed from the consistency group, the pair will use its own control policies. Its running status is not consistent with that of the consistency group. 
Suggestion: Before performing this operation, ensure that the parameters are correct to prevent service exceptions.
Have you read warning message carefully?(y/n)y
Are you sure you really want to perform the operation?(y/n)y
Command executed successfully.

System Response


Updated: 2019-07-22

Document ID: EDOC1000084195

Views: 368469

Downloads: 1594

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next