No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Command Reference 10

OceanStor 5300 V3, 5500 V3, 5600 V3, 5800 V3, and 6800 V3 Storage System V300R003

"Based on the CLI, this document describes how to use various commands classified by functions and how to set the CLI and manage the storage system through these commands. The document that you browse online matches the latest C version of the product. Click Download to download documents of other C versions."
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
change snapshot speed

change snapshot speed

Function

The change snapshot speed command is used to change snapshot restore speed.

Format

change snapshot speed snapshot_id=? restore_speed=?

Parameters

Parameter

Description

Value

snapshot_id=? ID of a snapshot.

To obtain the value, run "show snapshot general".

restore_speed=? A restore speed.

The value can be "Low", "Middle", "High", or "Highest", where:

  • "Low": indicates the low speed.
  • "Middle": indicates the medium speed.
  • "High": indicates the high speed.
  • "Highest": indicates the highest speed.

Level

Administrator

Usage Guidelines

Only the restore speeds of snapshots in the state of restored can be changed.

Example

To change the restore speed for snapshot "7" to low, run the following command:

admin:/>change snapshot speed snapshot_id=7 restore_speed=low
WARNING: You are about to modify periodic snapshots. This operation will damage all created snapshots in the periodic snapshot.
Suggestion: Before you perform this operation, ensure that the snapshot data can be released or is backed up.
Have you read warning message carefully?(y/n)y
 
Are you sure you really want to perform the operation?(y/n)y
 
 
Command executed successfully.

System Response

None

Translation
Download
Updated: 2019-07-22

Document ID: EDOC1000084195

Views: 368910

Downloads: 1594

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next