No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Command Reference 10

OceanStor 5300 V3, 5500 V3, 5600 V3, 5800 V3, and 6800 V3 Storage System V300R003

"Based on the CLI, this document describes how to use various commands classified by functions and how to set the CLI and manage the storage system through these commands. The document that you browse online matches the latest C version of the product. Click Download to download documents of other C versions."
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
change devicemanager tls

change devicemanager tls

Function

The change devicemanager tls command is used to modify the minimum TLS protocol version supported by DeviceManager.

Format

change devicemanager tls min_version=? [ controller_id=? ]

Parameters

Parameter

Description

Value

min_version=? The minimum TLS protocol version supported by DeviceManager.

The value can be:

  • v1.0 the version 1.0 of TLS protocol.
  • v1.1 the version 1.1 of TLS protocol.
  • v1.2 the version 1.2 of TLS protocol.
controller_id=? ID of a controller.

The value is in the format of "XA","XB","XC","XD", where the "X" is an integer ranging from 0 to 3, for example: "0A".

Level

Super administrator

Usage Guidelines

  • After you have run the "change devicemanager tls" command to modify the earliest TLS protocol version supported by DeviceManager, you need to run the "reboot storage service service_name=devicemanager" command to make the modification take effect.
  • Running the "reboot storage service service_name=devicemanager" command results in temporarily inaccessible DeviceManager services. Before performing this operation, you need to ensure that all users have exited the DeviceManager services.
  • Running the "change devicemanager tls min_version=? [ controller_id=? ]" command modifies the earliest TLS protocol version supported by DeviceManager for a specified controller.

Example

Change the minimum TLS protocol version supported by DeviceManager to v1.1.

admin:/>change devicemanager tls min_version=v1.1
Command executed successfully.

System Response

None

Translation
Download
Updated: 2019-04-04

Document ID: EDOC1000084195

Views: 300093

Downloads: 1561

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next