No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Command Reference 10

OceanStor 5300 V3, 5500 V3, 5600 V3, 5800 V3, and 6800 V3 Storage System V300R003

"Based on the CLI, this document describes how to use various commands classified by functions and how to set the CLI and manage the storage system through these commands. The document that you browse online matches the latest C version of the product. Click Download to download documents of other C versions."
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
add mapping_view host_group

add mapping_view host_group


add mapping_view host_group command is used to add a host group to a mapping view.


add mapping_view host_group mapping_view_id=? host_group_id=?





mapping_view_id=? Mapping view ID.

To obtain the value, run "show mapping_view general".

host_group_id=? Host group ID.

To obtain the value, run "show host_group general".



Usage Guidelines

A host group can be added to a maximum of 64 mapping views.


Add host group "2" to mapping view "2".

admin:/>add mapping_view host_group mapping_view_id=2 host_group_id=2
DANGER: You are about to map all LUNs in the LUN group to all hosts in the host group. If the host group contains multiple hosts but mutual access exclusion is not properly configured, multiple service hosts may write data to the same LUN, causing data damage or inconsistency. 
Suggestion: Before you perform this operation, ensure that mutual access exclusion has been correctly configured on service hosts.
Have you read danger alert message carefully?(y/n)y
Are you sure you really want to perform the operation?(y/n)y
Add host group 2 successfully.

System Response


Updated: 2019-07-22

Document ID: EDOC1000084195

Views: 366829

Downloads: 1594

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next