No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Command Reference 10

OceanStor 5300 V3, 5500 V3, 5600 V3, 5800 V3, and 6800 V3 Storage System V300R003

"Based on the CLI, this document describes how to use various commands classified by functions and how to set the CLI and manage the storage system through these commands. The document that you browse online matches the latest C version of the product. Click Download to download documents of other C versions."
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
add kmc test

add kmc test

Function

The add kmc test command is used to test the connectivity of a key management server.

Format

add kmc test port=? { kmc_server_ip=? | kmc_server_domain_name=? } [ type=? ]

Parameters

Parameter

Description

Value

kmc_server_ip=? IP address of the key management server.

-

kmc_server_domain_name=? Domain name of the key management server.

The value consists of 2 to 255 case-insensitive letters, digits, and hyphens (-). Domain names at various levels are separated by periods (.) and cannot start or end with a hyphen (-). The top-level domain name cannot contain digits only.

port=? ID of the port of the key management server.

The value ranges from 1 to 65535.

type Type of the key management server.

The value can be "Thales_kmip" or "SafeNet_kmip", where:1:"Thales_kmip": Thales key management server.2:"SafeNet_kmip": SafeNet key management server.The default value is "Thales_kmip".

Level

Super administrator

Usage Guidelines

  • This command is used to test the connectivity of a key management server.2:Parameters "kmc_server_ip" and "kmc_server_domain_name" are mutually exclusive.

Example

Test the connectivity of a key management server.

admin:/>add kmc test kmc_server_ip=192.168.8.211 port=5696 type=Thales_kmip
Command executed successfully

System Response

None

Translation
Download
Updated: 2019-07-22

Document ID: EDOC1000084195

Views: 362711

Downloads: 1590

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next