No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Command Reference 10

OceanStor 5300 V3, 5500 V3, 5600 V3, 5800 V3, and 6800 V3 Storage System V300R003

"Based on the CLI, this document describes how to use various commands classified by functions and how to set the CLI and manage the storage system through these commands. The document that you browse online matches the latest C version of the product. Click Download to download documents of other C versions."
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
create host_group

create host_group


create host_group command is used to create a host group.


create host_group name=? [ host_group_id=? | host_id_list=? ] *





name=? Host group name.

The value contains 1 to 31 digits, letters, underscores (_), hyphens (-), and periods (.).

host_group_id=? Host group ID.

The value is an integer ranging from 0 to 8191.

If you do not specify this parameter, the system automatically allocates an ID for a new host group.

host_id_list=? Host ID. When this parameter is specified, the host corresponding to the ID is added to a host group.
  • To obtain the value, run "show host general".
  • When multiple hosts need to be added, separate these host IDs with commas (,), or separate host ID range with hyphens(-), such as: 0,5-8.



Usage Guidelines

A host group can be added with a maximum of 64 hosts and a host can be added to a maximum of 64 host groups.


Create host group "test".

admin:/>create host_group name=test
Create host group successfully.

System Response


Updated: 2019-07-22

Document ID: EDOC1000084195

Views: 365577

Downloads: 1594

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next