No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Command Reference 10

OceanStor 5300 V3, 5500 V3, 5600 V3, 5800 V3, and 6800 V3 Storage System V300R003

"Based on the CLI, this document describes how to use various commands classified by functions and how to set the CLI and manage the storage system through these commands. The document that you browse online matches the latest C version of the product. Click Download to download documents of other C versions."
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
add notification receiver

add notification receiver

Function

The add notification receiver command is used to add a recipient for email or SMS based alarm notification. Use this command when you want to add a new email address or phone number to receive alarm notifications.

Format

add notification receiver alarm_level=? { email_receiver_list=? | message_receiver_list=? }*

Parameters

Parameter

Description

Value

alarm_level=? Alarm severity. Alarms of this severity will be sent.

The value can be "warning", "major", or "critical".

message_receiver_list=? List of phone numbers that receive alarm notifications.

Multiple phone numbers can be specified. Separate the phone numbers by commas(,). Each phone number must contain 3 to 31 characters. A maximum of 64 phone numbers can be configured to receive alarms of the same severity.

email_receiver_list=? List of emails that receive alarms notifications.

Multiple email addresses can be specified. Separate the email addresses by commas (,). Each email address must contain 5 to 255 characters. A maximum of 64 email addresses can be configured to receive alarms of the same severity.

Level

Administrator

Usage Guidelines

  • Before you execute this command to add a phone number, ensure that the SMS center number has been configured.
  • Before you execute this command to add an email, ensure that the SMTP server has been configured.
  • A maximum of 64 email addresses can be configured to receive alarms of the same severity.
  • A maximum of 64 phone numbers can be configured to receive alarms of the same severity.

Example

  • Adding "joe@company.com" to the email based alarm notification recipient list and sending warning alarms or alarms of higher severities to this email.

    admin:/>add notification receiver alarm_level=warning email_receiver_list=joe@company.com
    Command executed successfully.
  • Adding "13812345678" to SMS based alarm notification recipient list and sending warning alarms or alarms of higher severities to this phone number.

    admin:/>add notification receiver alarm_level=warning message_receiver_list=13812345678
    Command executed successfully.

System Response

None

Translation
Download
Updated: 2019-07-22

Document ID: EDOC1000084195

Views: 362650

Downloads: 1590

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next