No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Command Reference 10

OceanStor 5300 V3, 5500 V3, 5600 V3, 5800 V3, and 6800 V3 Storage System V300R003

"Based on the CLI, this document describes how to use various commands classified by functions and how to set the CLI and manage the storage system through these commands. The document that you browse online matches the latest C version of the product. Click Download to download documents of other C versions."
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
change bond_port general

change bond_port general


The change bond_port general command is used to change the MTU of a bond port.


change bond_port general bond_port_id=? mtu=?





bond_port_id=? Bond port ID.

To obtain the value, run "show bond_port".

mtu=? Bond port MTU.

The value is an integer between 1280 and 9000.



Usage Guidelines

  • Run "show bond_port" to query all bond ports.
  • Run "change bond_port general bond_port_id=? mtu=?" to change the MTU of a specific bond port.


Change the MTU of bond port "139009".

admin:/>change bond_port general bond_port_id=139009 mtu=4000
DANGER: You are about to modify the MTU settings for the bond port. This operation may interrupt services or cause service exceptions.
Suggestion: Before performing this operation, ensure that the modification is necessary.
Have you read danger alert message carefully?(y/n)y
Are you sure you really want to perform the operation?(y/n)y
Command executed successfully.

System Response


Updated: 2019-07-22

Document ID: EDOC1000084195

Views: 362729

Downloads: 1590

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next