No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Command Reference 10

OceanStor 5300 V3, 5500 V3, 5600 V3, 5800 V3, and 6800 V3 Storage System V300R003

"Based on the CLI, this document describes how to use various commands classified by functions and how to set the CLI and manage the storage system through these commands. The document that you browse online matches the latest C version of the product. Click Download to download documents of other C versions."
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
create quorum_server general

create quorum_server general


The create quorum_server general command is used to create a third-place quorum server.


create quorum_server general active_ip=? server_name=? [ active_server_port=? | description=? ] *





active_ip=? Active IP of the quorum server.

Active IP of the quorum server.

server_name=? Local server name.

The value contains 1 to 31 ASCII characters including digits, letters, underscores (_), hyphens (-), and periods (.), the first character must be a letter or number.

active_server_port=? Server communication port ID.

The value is an integer ranging from 1 to 65535. If this parameter is not specified, the system uses the default port 30002.

description=? Local description of a server.

The value contains 1 to 127 characters.



Usage Guidelines



To create a third-place quorum server whose IP address is"", server name is "cps0", run the following command.

admin:/>create quorum_server general active_ip= server_name=cps0
Command executed successfully.

System Response


Updated: 2019-07-22

Document ID: EDOC1000084195

Views: 365743

Downloads: 1594

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next