No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Command Reference 10

OceanStor 5300 V3, 5500 V3, 5600 V3, 5800 V3, and 6800 V3 Storage System V300R003

"Based on the CLI, this document describes how to use various commands classified by functions and how to set the CLI and manage the storage system through these commands. The document that you browse online matches the latest C version of the product. Click Download to download documents of other C versions."
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
remove remote_device link iscsi

remove remote_device link iscsi


The "remove remote_device link iscsi" command is used to remove Internet Small Computer System Interface (iSCSI) links to a remote device.


remove remote_device link iscsi iscsi_link_id=?





iscsi_link_id=? ID of a link.

To obtain the value, run "show remote_device link".



Usage Guidelines

  • Running this command deletes the information on the selected link from the storage system.2:Before running this command, ensure that the selected link is exactly the one you want to remove.


To remove iSCSI link "0".

admin:/>remove remote_device link iscsi iscsi_link_id=0
WARNING: You are going to remove links for remote devices. This operation removes all links but leaves one to bear replication services between storage arrays. If this link is faulty, all replication services between storage arrays are interrupted.
Suggestion: Before you perform this operation, ensure that you have selected correct links, which are removable.
Have you read warning message carefully?(y/n)y
Are you sure you really want to perform the operation?(y/n)y
Command executed successfully.

System Response


Updated: 2019-07-22

Document ID: EDOC1000084195

Views: 362586

Downloads: 1590

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next